Additional in-stock Multi Detection and Luminescence Plate Readers:

|Fluoroskan I|Perseptive Biosystems Cytofluor 4000|BMG FLUOstar|

|Biotek FL 600|Dynex Technologies MLX|

|ThermoFisher Finstruments Fluorescence|ThermoFisher Ascent|

|Tecan Spectrafluor|Tecan Spectrafluor Plus|Tecan Genios|

|Molecular Devices Gemini XS|ThermoFisher Luminoskan|

|ThermoFisher Luminoskan Ascent|

|BMG FLUOstar Galaxy|Perkin Elmer Victor 2 with or w/o injectors|

|Biotek FLX 800|

|Tecan Genios Pro|Thermo Fisher Ascent FL with w/o injectors|

|Biotek Synergy HT |Molecular Devices Gemini EM|

Luminoskan Model 96 Well Reader
with or without injectors from $6,295.
with 3 year warranty

Luminoskan is the top of the range research instrument for applications that demand flexibility.  Suited for applications without temperature control such as ATP studies. Comes with 3 year warranty and Spectrosoft PC Software.

Specifications:

Product Features

• 6 Decade Measurement Range
• Choice of 8 Measurement Modes

Product Specifications

• Sensitivity: < 0.5 fmol ATP 9.9 x 10^-21 moles Alkaline Phosphatase in 50µl LumiPhos® 530 at 37ºC
• Detector: Photomultiplier tube (PMT) with Bi-alkali Photocathode. Hamamatsu R1527.
• Spectral response (PMT): 185-680 nm. Peak 400 nm.
• Half Band Width (HBW): 210-560 nm.
• Dynamic Range: 6 Decades
• Measurement Range: 0.01-10,000 RLU
• Measurement Units: Relative Light Units (RLU)

On Board Data Reduction

• Multiplication Factor: 0.01 - 1000

• Threshold (LIMIT): +/-
• Threshold (DLIMIT): +/0/-
• Results Units: RLU, µmol/l, mmol/l, g/dl, g/l, mg/l, mg/dl, U/l, U/ml, U/µl, IU/l, IU/ml, IU/µl
• Blank Modes: Well, Random, Row, Column.

Measurement Modes

• Single: 100 ms reading per well fast scan mode.
• Integral: SIGNAL ( i )
  Integrates the reading over TOTTIME.
  Max. TOTTIME: 999.9 seconds.
  LAGTIME: 0 - 999.9 seconds.
• Integral 1: SIGNAL ( i 1 ) As Integral but reads during the dispensing operation.
• Peak: SIGNAL ( p )
  Reports the Maximum signal measured during the TOTTIME.
  Max. TOTTIME: 999.9 seconds.
  LAGTIME: 0 - 999.9 seconds.
• Slope: SIGNAL ( sl )
  Rate of change in signal during TOTTIME. RLU/s.
  Max. TOTTIME: 999.9 seconds.
  LAGTIME: 0 - 999.9 seconds.
• Continuous: SIGNAL ( c )
  Takes 50 equidistant readings during the TOTTIME. Graphical printout.
  TOTTIME range: 1 - 999.9 seconds.
  LAGTIME: 0 - 999.9 seconds.
• Continuous 1: SIGNAL (cl )
  As Continuous but readings are taken during the dispense operation.
• Repeat Scan: SIGNAL ( rs )
  Kinetic Mode. Define the number of readings (NPOINTS), the interval time (INTTIME) and the integral time (PMETIME).
  NPOINTS: 5 - 50
  INTTIME: 1 - 9999 seconds
  PMETIME: 0.1 - 999.9 seconds
  LAGTIME: 0 - 9999 seconds

External Software

• Spectrosoft (PC Software)

Luminoskan Reader that comes complete with  line cord, manual, six days a week technical support and 3 year warranty!  Made in Finland,  highest quality instrument. Easily reset to 220 Volt.  Easy operation with PC software, accurate and precision oriented reader.

ThermoFisher Labsystems factory service trained for +10 years.
Sales, service and support since 1982.